Make Wall Hooks From a Metal Hanger

Make handy wall hooks for use in drywall  out of a metal clothes hanger and vinyl tubing

1-clothes hanger
2ft of vinyl tubing
wire cutters

Wear Eye Protection!
Cutting  the hanger in the three areas  pictured nets you 3 large hooks. adjusting cut locations will  get you different sized hooks. Cut Pieces at an angle to leave a sharp point so it will penetrate the wall more easily.

Bend the hooks so that you have a "J"  with a 1-1/2 point  as pictured.

Feed the vinyl tubing over your hooks. then bend tip of hook  over to hold tubing in place.

Put the spike into Sheet rock (drywall) at a 45 degree angle and hang things from it , simple as that.