Make the Game of Ludo in 10 Mins From Scratch! ... Including the Pieces!

by Pra_ga in Craft > Reuse

3317 Views, 3 Favorites, 0 Comments

Make the Game of Ludo in 10 Mins From Scratch! ... Including the Pieces!

IMG_20191127_194956142.jpg

Ludo is a popular game played from 2 to 4 players.

This one can be built in about 10 minutes and it includes instruction for the pieces too!

Tools and Materials

IMG_20191127_185843759.jpg

Material for the board:

  1. Printout of the attached PDF - Simple black and white printout!
  2. Cardboard from an old cereal box.


Material for the pieces (optional, if you want to use your own pieces):

  1. Coloured plastic lids - These are the lids from used yoghurt containers.

Tools

  1. Glue stick
  2. Scissors (Be careful using these, since scissors can be really sharp!)
  3. Sketch pens
  4. Invisible tape (or any transparent tape would do!)

Downloads

Print Out the PDF and Cut.

IMG_20191127_190001922.jpg
IMG_20191127_190308851.jpg

Print out the PDF on any ordinary paper.

Cut carefully using the scissors on the lines shown.

You will have four identical strips as shown.

Glue the Strips

IMG_20191127_190633065.jpg

Apply the glue on the rear side of the strips.

Paste the Strips Onto the Cardboard

IMG_20191127_190347164.jpg

Paste each glued strip on the cardboard.

Trim Away the Extra Cardboard!

IMG_20191127_191154180.jpg
IMG_20191127_190819195.jpg
IMG_20191127_190908069.jpg

Remove the cardboard on which white strips are not pasted.

Pro-tip: You can also paste the printout directly on the cardboard before cutting, however I observed that this does not spread the glue evenly and the paper comes off the cardboard!

Cut a Spare Cardboard Piece!

IMG_20191127_193944734.jpg

Cut approximately square piece of cardboard, which has same length as that of the smaller side of strip.

Apply Glue to the Lower Side of Each Strip in the Triangular Area

IMG_20191127_191531479.jpg

Carefully apply glue ONLY to the triangular portion of each cardboard strip.

Paste All the Four Strips on Another Piece of Cardboard

IMG_20191127_191632240.jpg

Using another piece of cardboard, paste the glued triangular areas onto it.

Let Dry!

IMG_20191127_192246480.jpg

Once the pasting is done, it will start resembling a Ludo board!

Colour Away!

IMG_20191127_192349118.jpg
IMG_20191127_192510056.jpg
IMG_20191127_193811788.jpg

The 'safe' spot and the 'home path' is already marked on the PDF.

You can choose to colour and decorate your Ludo board as you want!

I drew an additional safe spot and coloured the 'home' triangle.

Protective Tape (optional)!

IMG_20191127_192945487.jpg
IMG_20191127_193158562.jpg

Paste the invisible tape (or any transparent tape) in strips across the board.

This is an optional step but would increase the life of your board tremendously!

And your board is complete!

Making the Play Pieces (optional): Paste the Piece

IMG_20191127_194029103.jpg

Paste the small play piece, marked on the PDF, on the plastic lid.

Carefully Cut a Strip of Plastic Along the Piece.

IMG_20191127_194051334.jpg

Cut a long strip from the plastic using scissors.

Make Square!

IMG_20191127_194202552.jpg
IMG_20191127_194250883.jpg

Using the plastic piece as guide, cut the strip into square pieces.

(Mine fell off while cutting so had to cut the strip approximately.)

Repeat the Same With Other Colour Lid

IMG_20191127_194614764.jpg

Doing this, you will have 4 pieces of one colour each.

This is sufficient for 2 people.

For more people, either use some other colour plastic lid or make a different shape.

Pro-tip : You can get creative with the sketch pens and draw symbols on your pieces!

Ready to Play!

IMG_20191127_194956142.jpg

... all you need is a dice!

Play away :)