Make a Wooden Playmobil Fire Station

This time I propose to you a creation for Playmobil: a fire station in medium (MDF) with 2 overhead doors for trucks, a perch of fire (bar of fireman), stairs, door, windows ...

I created it for Tom, a little boy of 3 years, at the request of his parents. They asked me an empty structure and raw and finished themselves (painting, decoration, furniture ...)

Video:

https://www.youtube.com/watch?v=DwVfh8Zfm0s

Dimensions:

• Width: 60 cms
• Height: 50 cms
• Depth: 35 cms

Plans are available for download

Completion time: 16 H (raw wood)

Materials:

• MDF 6 mm
• MDF 10 mm
• Chrome steel rod 8 mm
• Ball bearings
• PVC L profile (windows)
• Transparent plastic (windows)
• Hinges (door)
• Screws, nails, glue ...

Tools:

• Circular saw
• Jigsaw
• Screwdriver
• Glue gun
• Hand tools (hammer, saw, files ...)

The walls and the floor are made in MDF of 6 and 10mm following the plan.

The wood is cut with:

• Circular saw for large cuts
• Table saw or Dremel DSM20 for small cut
• Jigsaw for doors and windows
• Hole saw for the passage of the bar

I have calculated the angle of cut (20°) so that the 2 roofs join perfectly.

The 4 windows are cut with a jigsaw after having drilled holes in 2 opposite corners (to pass the blade).

The elements are assembled with wood glue and then screwed.

The tilting doors are cut in 10mm MDF. They are pierced with 3 holes to make the portholes and cutting lines imitate separate panels.

They then receive ball bearings at the 4 corners.

For the entrance door it is very simple: 2 wooden rings connected by a rods. One of them is cut and allows the door to be "locked".

The door is then installed with 2 small hinges.

The rireman pole is made with a 8 mm chromium plated steel rod. It is fixed with a glued wood washer.

I printed the stairs at scale 1 to use as a template.

They are made of 6mm MDF glued.

For overhead doors, I created rails with 10 and 3 mm MDF. They will allow the ball bearings to slide easily.

I also added a magnet for the doors to stay open.

For windows it is just PVC profiles stuck on a piece of transparent plastic. I used a template to properly align the parts.

Then I delivered the fire station to Tom's parents who finished the decoration (painting, furniture ...)