Make a Midori Type Traveler's Notebook

This is a simple process to make a midori style TN, everyone can make one by following several simple steps below.

To get start, you need to prepare some materials and tools:

Material:

• Leather - here we use crazy horse leather, a kind of cowhide, with size litter larger than 21.5 x 25cm
• Refill - 3 pieces with size 11x21cm
• Elastic Band - about 1.5m length

Tools:

• Scissors
• Cutter
• Ruler
• Awl
• Hammer
• Hold Punch

Here we are going to make a 12 x 21.5cm notebook, so we need a leather around 25 x 21.5cm.

Measure out and cut with a ruler and cutter, then make 5 punching markers on back of the leather according to the last image showing, now use hole punch and hammer to get 5 holes.

The elastic bands is 2mm thick, so I used 2mm hole punch.

First cut a 50cm length elastic band to connect the 4 holes on both sides, this band is used to fix notebooks.

Then cut a 30cm length elastic band and insert into the middle hole, it's used to wrap the cover.

Use a 50cm length elastic band to fix 2 notebooks through the centre.

First use the 3rd notebook insert from the outer layer elastic band, then insert the fixed 2 notebooks under the 3rd notebook and adjust them to a prefect look, wrap the elastic band and done.

See, it's very easy, right? Now it's your turn, action.