Make Your Own Kite in Less Than 20 Minutes!
by Taypeace627 in Outside > Kites
5477 Views, 5 Favorites, 0 Comments
Make Your Own Kite in Less Than 20 Minutes!
Do you want to buy a kite but don't have the time nor money? This is a fun, easy and cheap way to create your own kite in less than 20 minutes!
What You Will Need
Supplies:
-Sticks (3-4) that are 37-40 inches long
-Scissors
-Newspaper
-Yarn
-Cloth (can be an old t-shirt)
-Tape
-Tape measure
Note: the sticks and yarn can be found at Michaels
Hazard: scissors and sticks are sharp. Not meant for children
-Sticks (3-4) that are 37-40 inches long
-Scissors
-Newspaper
-Yarn
-Cloth (can be an old t-shirt)
-Tape
-Tape measure
Note: the sticks and yarn can be found at Michaels
Hazard: scissors and sticks are sharp. Not meant for children
Cut the Newspaper
What you will need:
-Newspaper
-Scissors
Make a square:
-Place the newspaper flat on the table (horizontally) and bring the top right corner to the opposite side (bottom left) making a right triangle
-Press on the edge of folded area to form a crease
-Use the edge as a guide to cut off the non-folded part (rectangle piece to the left of triangle)
-Newspaper
-Scissors
Make a square:
-Place the newspaper flat on the table (horizontally) and bring the top right corner to the opposite side (bottom left) making a right triangle
-Press on the edge of folded area to form a crease
-Use the edge as a guide to cut off the non-folded part (rectangle piece to the left of triangle)
Cut the First Stick
For your first stick:
-Place the stick along the crease of the paper (diagonally)
-Cut off the part of the stick hanging off the edge of the paper
Note: You should not have any left over stick hanging off the paper
-Place the stick along the crease of the paper (diagonally)
-Cut off the part of the stick hanging off the edge of the paper
Note: You should not have any left over stick hanging off the paper
Cut the Second Stick
Cut and place the second stick:
-Cut the second stick in the middle to create two equal shorter sticks
-Place one of the short sticks across the longer stick forming a cross
Note: the edges of the short stick should also be touching the edges of the paper
-Cut the second stick in the middle to create two equal shorter sticks
-Place one of the short sticks across the longer stick forming a cross
Note: the edges of the short stick should also be touching the edges of the paper
Securing the Sticks Together
Tie a knot around the sticks:
(1)Loop on side of the short stick with the yarn
cross over the middle
(2)Loop around again
repeat 3 times
(3)tie a knot with the yarn
Note: make sure to keep the sticks in a cross like figure and that the string is pulled tight enough around the sticks so the cross is maintained
(1)Loop on side of the short stick with the yarn
cross over the middle
(2)Loop around again
repeat 3 times
(3)tie a knot with the yarn
Note: make sure to keep the sticks in a cross like figure and that the string is pulled tight enough around the sticks so the cross is maintained
Create the Frame of the Kite
Create a diamond :
-Cut third stick to fit space between each point of the cross
-repeat until all sides are fitted, creating a diamond shape
-Cut third stick to fit space between each point of the cross
-repeat until all sides are fitted, creating a diamond shape
Tape the Diamond to the Paper
Tape the diamond:
-Place the cross back on the paper where the longest stick is still aligned with the crease
-Tape each point of the cross
-Then place the sticks you just cut into the diamond shape
-Then tape all 4 corners while maintaining the diamond shape
-Place the cross back on the paper where the longest stick is still aligned with the crease
-Tape each point of the cross
-Then place the sticks you just cut into the diamond shape
-Then tape all 4 corners while maintaining the diamond shape
Tape the Rest of the Kite
Fit the paper around the frame:
-Carefully fold the edges of the paper over the sticks and tape it down
-Do this for all four sides of the diamond
Note: Make sure to pull paper tightly so the kite is sturdy and secure
-Carefully fold the edges of the paper over the sticks and tape it down
-Do this for all four sides of the diamond
Note: Make sure to pull paper tightly so the kite is sturdy and secure
Make the Tail
To make the tail:
-Cut a strip about an inch to two inches wide of cloth
Note: length can be as long as you want it to be, usually about 13-16 inches
-Cut a strip about an inch to two inches wide of cloth
Note: length can be as long as you want it to be, usually about 13-16 inches
Place the Tail on Your Kite
Connect the tail:
-place one side of the tail at the bottom point of your diamond about an inch up from the point
-tape the cloth to the kite
Note: bottom point is the most narrow corner of the kite
-place one side of the tail at the bottom point of your diamond about an inch up from the point
-tape the cloth to the kite
Note: bottom point is the most narrow corner of the kite
Connect the Rope
To fly your kite:
-use your yarn to tie a knot in the center of the cross
Note: Do not cut the yarn from the spool because this is what you will use to fly your kite
-use your yarn to tie a knot in the center of the cross
Note: Do not cut the yarn from the spool because this is what you will use to fly your kite