Make Your Ideas With Laser Anywhere-Make a Brave Triceratops Together!

Using laser cutter to make a brave triceratops.

Material:3mm plywood

Laser head:standerd head

Thunder laser used:

Model: Nova 35 laser cutter machine

Laser Tube: 80 watt

Processing Mode: cut

Speed: 20mm/s

Max power: 60%

Min power: 70%

After we design the file in CorelDraw, we send the file to laser software directly by clicking the laser plug-in. Then we input the best setting parameters and “Download” the file to the laser cutter.

Place the wood sheet on the machine working table, move the laser head to the right start position, adjust the focal distance, press “Origin” button to set the starting point, then press “Start” to run the job.

After the laser cutter finish working, take out the pieces and put them aside.then,last step,Start assembling triceratops.

Well done the Triceratops , as long as you turn on the switch of laser cutter, You can make a triceratops by yourself. Enjoy it!do you like it?