Make Power Tool Trigger in 5 Min
by sanyam jain in Workshop > Tools
3458 Views, 20 Favorites, 0 Comments
Make Power Tool Trigger in 5 Min

Need to keep your power tool triggered for long(for the various diy projects like belt sander cutter) you need to make this
Gather You Materials

All you gonna need is :
- a long bolt with 3 nuts(preferred between 7 mm~10 mm)and 100 mm length
- drill bit of same size
- a piece of wood(5~7 mm)
- Velcro(300mm of soft and 100 mm of hard)
- drill machine
- glue gun(optional)
Velcro


Take one end and to the opposite side sew of glue the Velcro together
Cut Hole for the Bolt


Cut the Velcro from the center and insert the bolt with its head on the soft side of Velcro and sandwich the Velcro between the nuts
Support to Machine


Drill the hole in the wooden piece and hammer it to the end of the bolt
Action


You now have a handy tool for your tool