Make Green-Friendly Tools From Plastic Coat-Hangers
by FeedTheGrid in Craft > Reuse
10523 Views, 7 Favorites, 0 Comments
Make Green-Friendly Tools From Plastic Coat-Hangers
Reclaimed from an alley trash can. Just trying to save the environment, one step at a time.
It might not be as detailed as it would be with an Epilog Zing Laser Etcher.
But, it's still a useful tool! ; - )
I thought: why waste the energy sending old plastic coat-hangers to the landfill; or waste energy melting them down at a recycling plant? Every time I put something in the trash, or see something being thrown away, I always wonder how these items could be repurposed.
Voila! Hanger Tools!
Materials Needed:
Plastic Coat Hanger
Wire-Cutters (or a hacksaw)
Sandpaper
It might not be as detailed as it would be with an Epilog Zing Laser Etcher.
But, it's still a useful tool! ; - )
I thought: why waste the energy sending old plastic coat-hangers to the landfill; or waste energy melting them down at a recycling plant? Every time I put something in the trash, or see something being thrown away, I always wonder how these items could be repurposed.
Voila! Hanger Tools!
Materials Needed:
Plastic Coat Hanger
Wire-Cutters (or a hacksaw)
Sandpaper
Get a Hanger and Cut a Piece Out of It.
If you see plastic hangers in the trash, get 'em! You can make tools out of them.
The size of piece that you choose to cut from this great re-usable resource, depends on what kind of tool you are making. This tool is for burnishing and writing into copper. So, I cut about a six-inch piece out of this one. Choose any section of the hanger that fits your need. I chose one of the corners because then you can hanger the tool from its hook when you're finished using it.
The size of piece that you choose to cut from this great re-usable resource, depends on what kind of tool you are making. This tool is for burnishing and writing into copper. So, I cut about a six-inch piece out of this one. Choose any section of the hanger that fits your need. I chose one of the corners because then you can hanger the tool from its hook when you're finished using it.
Form the Tip
I used 320-grit sandpaper to form the tip of this one. But, you could use a belt-sander as well.
Use Your Tool!
Sweet!
I grabbed a small piece of copper sheet that i had lying around. And, I'm aware that my artwork could have been more detailed if I had an Epilog Laser Etcher. But, I wanted to quickly show how effective the tool was. Check out the pics.
Have fun. And, don't get hurt.
I grabbed a small piece of copper sheet that i had lying around. And, I'm aware that my artwork could have been more detailed if I had an Epilog Laser Etcher. But, I wanted to quickly show how effective the tool was. Check out the pics.
Have fun. And, don't get hurt.