Make Cannon in 5 Minutes
by sanyam jain in Workshop > Woodworking
493 Views, 1 Favorites, 0 Comments
Make Cannon in 5 Minutes
![F39JSA8IZ6C4LK0.jpeg](/proxy/?url=https://content.instructables.com/FHJ/4BJL/IZ6BTQBA/FHJ4BJLIZ6BTQBA.jpg&filename=F39JSA8IZ6C4LK0.jpeg)
Always wanted to make a weapon by yourself, You have landed on the correct place just follow the instruction and
you will make it(a cannon) in just 5 minutes
Materials Required
![DSC_0104.jpg](/proxy/?url=https://content.instructables.com/FAH/NCKN/IZ6C6AYI/FAHNCKNIZ6C6AYI.jpg&filename=DSC_0104.jpg)
- drill machine
- hack saw
- wire cutter
- pencil
- drill bits (8 mm and 1.5 mm)
- piece of wood
- match box
- yarn
Making Cannon Body
![DSC_0105.jpg](/proxy/?url=https://content.instructables.com/FUX/BT81/IZ6C6AZZ/FUXBT81IZ6C6AZZ.jpg&filename=DSC_0105.jpg)
![DSC_0106.jpg](/proxy/?url=https://content.instructables.com/FJC/ZXTK/IZ6C6B2Q/FJCZXTKIZ6C6B2Q.jpg&filename=DSC_0106.jpg)
![DSC_0123.jpg](/proxy/?url=https://content.instructables.com/F80/ARX5/IZ6C6EOT/F80ARX5IZ6C6EOT.jpg&filename=DSC_0123.jpg)
First make a line joining 10 cm of one side to another side and vice versa and you have a pattern.Cut it.
Making Holes
![DSC_0110.jpg](/proxy/?url=https://content.instructables.com/FCK/L0SK/IZ6C6BB1/FCKL0SKIZ6C6BB1.jpg&filename=DSC_0110.jpg)
![DSC_0109.jpg](/proxy/?url=https://content.instructables.com/FWD/MNJB/IZ6C6B9F/FWDMNJBIZ6C6B9F.jpg&filename=DSC_0109.jpg)
![DSC_0107.jpg](/proxy/?url=https://content.instructables.com/FTK/YY7T/IZ6C6B4Y/FTKYY7TIZ6C6B4Y.jpg&filename=DSC_0107.jpg)
![DSC_0123.jpg](/proxy/?url=https://content.instructables.com/F0F/VUF4/IZ6C6BMM/F0FVUF4IZ6C6BMM.jpg&filename=DSC_0123.jpg)
Drill a hole of about 8 mm in the center of the body and measure its depth take this length and make hole of 1.5
mm along that length as shown above
Collecting the Powder
![collecting powder](/proxy/?url=https://content.instructables.com/F2Y/TIJD/IZ6C6C4Q/F2YTIJDIZ6C6C4Q.jpg&filename=collecting powder)
Take the match sticks.Remove the coating from the stick and grind it thoroughly collect a lots of it.
Making Fuse
![making fuse](/proxy/?url=https://content.instructables.com/FV7/3IGG/IZ6C6C6J/FV73IGGIZ6C6C6J.jpg&filename=making fuse)
![DSC_0115.jpg](/proxy/?url=https://content.instructables.com/FY7/GCOL/IZ6C6BH0/FY7GCOLIZ6C6BH0.jpg&filename=DSC_0115.jpg)
Make the fuse by making the paste of the powder and coat the paste on the yarn. Let it dry
Shooting
![fire time](/proxy/?url=https://content.instructables.com/F2T/KP94/IZ6C6CB6/F2TKP94IZ6C6CB6.jpg&filename=fire time)
![DSC_0121.jpg](/proxy/?url=https://content.instructables.com/FWJ/VJE6/IZ6C6BIE/FWJVJE6IZ6C6BIE.jpg&filename=DSC_0121.jpg)
Your cannon is ready. Put the fuse in the 1.5 mm hole. and fill the powder in the 8mm hole .Put a projectile in the
opening of the cannon light up the fuse and thushh...