Make a HDD Magnetic Mirror

 Hard drives have one or more spinning reflective disks in them and make great mirrors.

 The only tool is a security hex 8 size screw driver

Parts
-Hard Drive
-Glue
-Stick (to spread glue)
-Magnet 

 Use your bit to unscrew all the screws, including the hidden ones and pop off your HDD's cover.

Sorry I took the drive apart before I started this so I didn't get pictures.

 There are two arms for each disk (one top, one bottom.)  These are brittle you can just break them off.  On the opposite side of the arms is a coil and heavy duty magnet, you don't want to use it NO GLUE will hold it yet, maybe try JB weld.  Bust off the other this stuff to so you can free the disks.  Now you must use your hex bit to remove the rest of the screws that hold the disks in.  Now take out the disks.

 Glue the two disks together and add a cutout magnet to the back.