Magnetic Tool Wristband

Building computers can be hard, keeping track of all the small screws and precision screwdrivers. Rather than a cup or a belt, why not keep all your screwdrivers and screws on your wrist?

-Metal from Any Source (used Perforated Cooking Pan)

-Electrical Tape

-Magnets(taken from "Magnetic Tins" from Dollar Tree)

-Metal Snips

-Cutting Tool for Tape

-Metal File

Sheet metal can make for a good bracelet, so cut the sheet long enough to wrap around your wrist and wide enough to attach a magnet of choice.

Because cuts on the wrist are not comfortable in the least, grind down the edges with a file or bend back the edges with pliers, and don't forget to cut the corners to round edges!

Apply even force across the plate to form it into the shape of your wrist. Add magnets using adhesive. I took my magnets from dollar store magnetic containers, and I needed to use both from the pack to get the enough force.

If your magnets are not yet strong enough to hold a screwdriver, wrapping a piece of tape sticky side out can give your wristband extra grip. If you make the wristband out of metal like I did, then you could feasibly ground yourself by connecting the band via alligator clip to a power supply plugged in and switched off. Remember not to switch on the power supply while you are connected to avoid electrocution. Have fun with the Tool Wristband!