Magnetic Levitation Ufo (it's Easy)

by matixvision in Workshop > 3D Printing

92 Views, 1 Favorites, 0 Comments

Magnetic Levitation Ufo (it's Easy)

Magnetic Levitation UFO ( it’s easy)
3DProjectCover.png
3DProjectUfo.png
3DProject_b.png
3DProject_c.png
3DProject_d.png

This project is simple and involves using a few magnets and two 3D-printed components: one is the UFO, and the other is the support base. Once everything is printed, you'll need to use some fishing line to assemble the parts. Insert the magnets as shown in the diagram, and attach the fishing lineā€”one end tied to the bottom of the base and the other to the bottom of the UFO. Then, insert the small magnet. Adjust the distances accordingly to make sure the UFO remains suspended.

Keep in mind that magnets have polarity: they attract each other when aligned correctly and repel when positioned oppositely.

Below you will find the two files for 3D printing

Supplies

IMG_7179.jpg
IMG_7180.jpg
IMG_7181.jpg
IMG_7187.jpg

3D Printer, fishing line 0,40mm, Neodymium Magnets n.7pz.: 8*1.4mm + n.1pz.: 6*1.75mm

FB8KL71M0S5O3YH.jpg
FJYHOQIM0S5O46D.jpg
FKX3INDM0S5O450.jpg
IMG_7186.jpg
IMG_7187.jpg
IMG_7195.jpg
IMG_7197.jpg

Step is easy