Magnetic Folder for Dies
I have a lot of dies which fall out the original packages, so I made a folder to hold them.
Prepare
I took some scrap cardboard and cut 2 pieces 15x21cm. One piece of 4x 21 and two pieces 15x4 cm ( to make it extra safe, if they fall out, this will hold them.
Create the Book
Glue the parts with tape, leave some space, the sheets with dies will be about 1 cm thick.
Inside
Cut the magnetic sheets a little smaller than the outside 14x20 cm and tape together
Put Together
Glue the magnetic sheets with the sides that don't stick together and glue into the book.
(As you can see I decorated first, but it's better to put the book together first, for an easier/ prettier finishing)
(As you can see I decorated first, but it's better to put the book together first, for an easier/ prettier finishing)
Decorate Outside
Cut some nice paper in pieces 14x20cm and glue to front side, inside and the little pieces at the top and bottom.
Finished
The result, 8 pages where I can put my dies.