Magnetic Dremel Bit Holder
by davidzaslow in Workshop > Organizing
464 Views, 4 Favorites, 0 Comments
Magnetic Dremel Bit Holder
![Pic8.jpg](/proxy/?url=https://content.instructables.com/FK6/UGG1/K5ML6GVF/FK6UGG1K5ML6GVF.jpg&filename=Pic8.jpg)
You just finished dissecting an old microwave oven that you had lying around, congratulations!!!
Wondering what to do with all the salvaged pieces?
Why not make a magnetic Dremel bit holder for all those bits that you have lying around?
I'll show you how in 4 easy steps.
Supplies
Round disk magnet salvaged from old microwave oven
Hot glue gun
Small piece of hard foam
Utility knife
The Magnet
![Pic1.jpg](/proxy/?url=https://content.instructables.com/FS2/E9H9/K5ML6GJK/FS2E9H9K5ML6GJK.jpg&filename=Pic1.jpg)
![Pic2.jpg](/proxy/?url=https://content.instructables.com/F3L/0867/K5ML6GMQ/F3L0867K5ML6GMQ.jpg&filename=Pic2.jpg)
Take the magnet and place it on a solid and firm surface
The Foam
![Pic3.jpg](/proxy/?url=https://content.instructables.com/FF2/2582/K5ML6GP2/FF22582K5ML6GP2.jpg&filename=Pic3.jpg)
![Pic4.jpg](/proxy/?url=https://content.instructables.com/F1E/19U7/K5ML6GR1/F1E19U7K5ML6GR1.jpg&filename=Pic4.jpg)
Take the piece of foam and make holes and/or slots with utility knife
The Glueing
![Pic5.jpg](/proxy/?url=https://content.instructables.com/FT8/376M/K5ML6GUH/FT8376MK5ML6GUH.jpg&filename=Pic5.jpg)
![Pic6.jpg](/proxy/?url=https://content.instructables.com/FE5/08BO/K5ML6GUM/FE508BOK5ML6GUM.jpg&filename=Pic6.jpg)
![Pic7.jpg](/proxy/?url=https://content.instructables.com/F4B/FXL9/K5ML6TAN/F4BFXL9K5ML6TAN.jpg&filename=Pic7.jpg)
With the hot gun put glue on the magnet then join the foam and the magnet
Put Your Bits in the Magnetic Dremel Bit Holder
![Pic8.jpg](/proxy/?url=https://content.instructables.com/F8E/EA5D/K5ML6T9O/F8EEA5DK5ML6T9O.jpg&filename=Pic8.jpg)
Put your bits in the holes and slots and enjoy!!!