Magnet Toggle Switch Fidget
by KIO Design in Living > Toys & Games
249 Views, 1 Favorites, 0 Comments
Magnet Toggle Switch Fidget
![IMG_3236.png](/proxy/?url=https://content.instructables.com/F63/0WF0/LJWVJGYG/F630WF0LJWVJGYG.png&filename=IMG_3236.png)
I made this super satisfying magnetic toggle switch just for fun!
Supplies
I used some 5x5x5 mm neodymium magnets and a 3D printed part.
You can get the magnets here
The STL and Fusion360 files are included in this Instructable
Print the Parts
![F630WF0LJWVJGYG.png](/proxy/?url=https://content.instructables.com/FDJ/FEGT/LJWVJHL0/FDJFEGTLJWVJHL0.png&filename=F630WF0LJWVJGYG.png)
Print the parts with your 3D Printer
Use a brim for better bed adhesion!
Insert the Magnets
![IMG_3237.png](/proxy/?url=https://content.instructables.com/FV5/T0MJ/LJWVJGQW/FV5T0MJLJWVJGQW.png&filename=IMG_3237.png)
Insert the magnets into the holes of both parts
Important: The two magnets on the rail (the longer part) must have the same polarity, but the magnet on the sliding part must have a different polarity, so it attracts the other magnets when inserted.
Put the Parts Together
![F630WF0LJWVJGYG.png](/proxy/?url=https://content.instructables.com/FQX/XWHY/LJWVJIHE/FQXXWHYLJWVJIHE.png&filename=F630WF0LJWVJGYG.png)
Now just slide the small part into the rail and have fun!