Magnetic Camera Arm

I made this magnetic camera mount to assist me in making my Youtube videos. This is a easy project to complete. All the parts are easy to find from Amazon and your local hardware store.
Parts List

3d Print

3D Print the base of the camera mount. Follow this Link to my Thingiverse page for the STL file and print settings.
Prep the Base


Insert three #10-24 nuts into the outside three hex sockets. Insert one 1/4-20 nut into the center hex socket.
Assembly

Using three #10-24 machine screws fasten the three magnets to the Base. Screw the Arm into the 1/4-20 nut with the Base between the arm and the nut.
Left Over Magnets


I ended up with several magnets left over. Here are a few ideas to put them to good use.