Magic Clock

by FranekStrzembek11 in Workshop > Laser Cutting

354 Views, 2 Favorites, 0 Comments

Magic Clock

IMG_3452.JPG

Hello!

I am going to make Orlando Magic Clock. MY clock is going to have logo of Orlando Magic Basketball team and it will have a schedule of Magic`s matches. It will shows you when and what time are the nearest matches. I decided to make this clock actually because ia used to have a lots of problems with remembering when is the match of my favorite team.

Step 1: Deigning Your Work.

IMG_3439.JPG
IMG_3435.JPG

For the design I decided to use a photo to show how my ideas were developing. Also if you think that one of this ideas is better than my final design. It is not needed that your clock have to look the same as mine, you can also just inspire to my idea.

Firstly I was thinking about doing a circular clock that will have a place where it will be possible to insert the schedule. Secondly I thought about taking a card like A4 and attaching it to the schedule of my favorite team's clock and logo. Thirdly I decided to use laser engrave laminate and make it with basketball court dimensions and then glue in one half schedule with their matches and in the second half glue the Orlando magic logo.

My Final Idea!

IMG_3449.JPG

In my final idea I decided to make big inscription "Magic" in the top and make this schedule in the bottom. Also I decided to put clock and clock mechanism in the middle and to draw three point and line basketball house to make it look like basketball court. Furthermore i made it with

Finished Version

IMG_3437.JPG
IMG_3452.JPG

I finally finished my clock!