Made a Stool, Turned Out Cool!

by michjacob in Workshop > Laser Cutting

933 Views, 10 Favorites, 0 Comments

Made a Stool, Turned Out Cool!

IMG_1730.JPG

this is just a small derriere-shaped stool I made for my very tiny balcony.

about 13x10x7in -ish

Materials

laser cutter

1/4in MDF (16x32 sheet)

the file(given)

Laser Cut Your Parts

for the pattern I first cut out the black lines and then vector engraved the red and yellow lines. For the engraving I moved the bed further away to purposefully thicken the lines (I re-aligned the file by guess work). I preferred to use a more powerful setting for the red lines for effect.

Assemble

IMG_1734.JPG

the side panels fit together like linkin-logs with the tabs facing upwards, then fit the top. it was a very tight fit and I ended up scraping a bit off of the edges, but this way I didn't need any adhesive --- users choice.

then you're ready to sit anyplace you like!