Made Chip at Home
![16729486440286606944848883505231.jpg](/proxy/?url=https://content.instructables.com/FFM/WQUZ/LCJ3N07I/FFMWQUZLCJ3N07I.jpg&filename=16729486440286606944848883505231.jpg)
I want to show you how to make a chip out of wire and non-conductive plastic. This is a chip for experiments or mini projects (you can use to teach children)
Creating Tracks
![16729491940127060806505277977657.jpg](/proxy/?url=https://content.instructables.com/FS1/A7NW/LCJ3N08M/FS1A7NWLCJ3N08M.jpg&filename=16729491940127060806505277977657.jpg)
Take and cut off a rectangular piece of plastic with a knife. Draw paths, then make them with a screwdriver or knife.
Glue in Action
![16729493836162355869127079164706.jpg](/proxy/?url=https://content.instructables.com/FCZ/RUF5/LCJ3N099/FCZRUF5LCJ3N099.jpg&filename=16729493836162355869127079164706.jpg)
We take the wiring and bend it according to the shape of the tracks that we made in plastic. And stick them in plastic.
Black
![16729496571557590300064823987604.jpg](/proxy/?url=https://content.instructables.com/FCM/17TF/LCJ3N0B0/FCM17TFLCJ3N0B0.jpg&filename=16729496571557590300064823987604.jpg)
Paint the chip black and mark which chip it is. And do not forget to draw a connection diagram for it.
Test and Used
![16729501417641247108167677201473.jpg](/proxy/?url=https://content.instructables.com/FR4/VGHJ/LCJ3N0CZ/FR4VGHJLCJ3N0CZ.jpg&filename=16729501417641247108167677201473.jpg)
![16729503822481328159453494262984.jpg](/proxy/?url=https://content.instructables.com/F2B/66N5/LCJ3N0ET/F2B66N5LCJ3N0ET.jpg&filename=16729503822481328159453494262984.jpg)
Now the chip is ready to use and work in your projects. Leave a review and do it for the experiment please. Maybe you just need your chip for its intended purpose.
For the test, use an arduino board maket or a multimeter.
For the test, use an arduino board maket or a multimeter.