Mac 10: Collaboration With Red Book of Westmarch.
by didexo in Living > LEGO & K'NEX
1090 Views, 1 Favorites, 0 Comments
Mac 10: Collaboration With Red Book of Westmarch.
So this is the prototype V1. I had a snow day today so I had a little time to work on it. Ignore the front of it because there is nothing really important there. The trigger works by pivoting and gliding up the hinge, releasing the firing fin. Inside is a compact Y-connecter barrel.The length that the pin comes out is neither bad nor good. What I'm asking you to do is make a handle/mag or make the handle and I can try on the mag. To make it easier on you I chose this type of trigger because it leaves plenty of space for you to make the handle.
Things I just Added (That aren't in the pictures.)
In the back where the firing pin is, the upper first yellow 5 way connector on either side I replaced with a blue rod to prevent the trigger getting caught. You will know what I mean when you build this.
I modded the bottom of the trigger by making it connect to the barrel with 2 female parts of a hinge piece. It make the trigger sturdier.
Update 1- Increased pin draw back by moving trigger mech backwards. Removed blue rods because they are now useless. Fixed front, and added handle guard.
Things I just Added (That aren't in the pictures.)
In the back where the firing pin is, the upper first yellow 5 way connector on either side I replaced with a blue rod to prevent the trigger getting caught. You will know what I mean when you build this.
I modded the bottom of the trigger by making it connect to the barrel with 2 female parts of a hinge piece. It make the trigger sturdier.
Update 1- Increased pin draw back by moving trigger mech backwards. Removed blue rods because they are now useless. Fixed front, and added handle guard.