MY ROBOT PROCESS

GET SUPPLIES (SOMETHING LIKE THIS)

MAKE A UFO SHAPE LIKE THIS

ADD RED STRING AROUND WITH GLUE FOR DETAIL

GET SOME STICKS LIKE THESE THAT ARE WOODEN AND EASILY ARE GLUEABLE AND ATTATCH TO THE SIDES OF THE UFO SHAPED CONE ABOVE THE RED DETAILING

GET SOME BOTTLED SPRAY LIKE THIS THAT IS LIKE ACRYLIC THAT CAN HOLD THINGS TOGETHER LIKE GLUE.

FIND CONE OR ANYTHING LIKE THE IMAGE ON TOP OF THE HEAD (UFO) AND ATTATCH STRING THROUGH THE (UFO) AND MAKE RED EYES. SPRAY GLUE THAT CONE OR WHATEVER YOU USE TO THE TOP OF THE HEAD

MAKE ANOTHER UFO CONE AND ATTATCH IT TO THE BOTTOM OF THE CURRENTLY MADE HEAD OF THE ROBOT AND ADD SOME STRING AROUND THE MIDDLE OF IT TO ADD MORE DETAIL.

CREATE A BASE LIKE THIS FOR THE LEGS, AND MAKE IT EVEN WITH ANYTHING FLAT LIKE I USED BUTTTONS, IF IT IS NOT STRAIGHT AND FLAT STANDING USE ANYTHING FLAT TO MAKE IT A FLAT BASE AND BALANCED.

SOMETHING LIKE THIS, I ADDED SOME BASE SUPPORT AROUND THE LEGS SO THEY DO NOT FALL, MINE WAS A LITTLE SKETCHY BECAUSE I MADE THE HOLES TOO BIG, DONT DO WHAT I DID ITS A HARD THING TO RECOVER FROM.

when you are done it should look somethinglike this, if not close thank you