MDF Cristhmas Tree
This is the way i built a Cristhmas Tree for my wife aunt.
Check My social media and make sure you subscribe !!
Snapchat : trashwoodshop
twitter: https://twitter.com/trashwoodshop
Instangram : https://www.instagram.com/trashwoodshop/
Make the Triangles and Cut Them to Size
Make 3 diferent size triangles and cut them the size that you like to make a tree like shape!!!
Make a Star for the Top
Draw a star or download a template for it . I asked the wife she makes an awsome stars !!!
Space for the Support
Make sure you leave a space on the bottom for the support you dont wanna get lights on the support space.
Holes for the Lights
Drill enough holes for the lights that you have.
Make sure you dont do holes where the pieces are going to be Glued .
Glue
After the holes are done and counter sunk. Glues the 3 triangles and the Start let it dry overnight.
Paint
I painted with a white primary ! after dry painted gold !
Base
Make a base for the Tree and with a sligh angle (ex:10ยบ) so the tree leans a bit back
Lights
Now put the lights in the holes,
Hot glue any that might come loose !
Test the lights to see if the work before glue them
Ornements
Add some hoocks then attatch the ornemnts and you are done
Enjoy And Marry Marry Christmas