MAR Mod: Gray Connector Ammo
by Masterdude in Living > LEGO & K'NEX
773 Views, 1 Favorites, 0 Comments
MAR Mod: Gray Connector Ammo
The normal MAR fires gray and orange connectors joined by a green rod. Now if for some reason you prefer to shoot gray connectors you can use this instructable to make a modified magazine which will let your MAR fire gray connectors.
Note: This will not tell you how to make the whole gun. This only tells how to make a new mag so you can fire new ammo. If you haven't made the MAR yet then here is a link.
More Instructables by me.
Note: This will not tell you how to make the whole gun. This only tells how to make a new mag so you can fire new ammo. If you haven't made the MAR yet then here is a link.
More Instructables by me.
Making the Components
Make the following:
Picture 1: Make 2.
Picture 2: Make 1.
Picture 3: Make 1.
Picture 4: Make 1.
Picture 5: Make 1.
Picture 6: Make 1.
Picture 7: Make 1.
Picture 8: Make 1.
Picture 1: Make 2.
Picture 2: Make 1.
Picture 3: Make 1.
Picture 4: Make 1.
Picture 5: Make 1.
Picture 6: Make 1.
Picture 7: Make 1.
Picture 8: Make 1.
Construction
Follow the images:
Picture 1: Add white and blue rods where indicated.
Picture 2: Place the earlier made components as shown in the image.
Picture 3: Place the earlier made component as shown.
Picture 4: Place white rods where indicated on the earlier made part.
Picture 5: Place the other already made part as shown.
Picture 6: Add light gray connectors where shown.
Picture 7: Place white rods with tan connectors where shown.
Picture 8: Place the earlier made part as shown in the image.
Picture 9: Connect the components you made as shown.
Picture 10: Add the last part you earlier made as shown in the image.
Picture 1: Add white and blue rods where indicated.
Picture 2: Place the earlier made components as shown in the image.
Picture 3: Place the earlier made component as shown.
Picture 4: Place white rods where indicated on the earlier made part.
Picture 5: Place the other already made part as shown.
Picture 6: Add light gray connectors where shown.
Picture 7: Place white rods with tan connectors where shown.
Picture 8: Place the earlier made part as shown in the image.
Picture 9: Connect the components you made as shown.
Picture 10: Add the last part you earlier made as shown in the image.
Putting Everything Together and Firing
Replace the original mag/ammo feed with the one you just made. It should look like in the image. Load and shoot like with the original MAR. Here is a Video on loading and firing.
Warning- This may cause harm or injury if misused. Do not point it at people. I am not responsible for damage, injury, or death caused by this instructable.
Warning- This may cause harm or injury if misused. Do not point it at people. I am not responsible for damage, injury, or death caused by this instructable.