MAKING a CARDBOARD ALADDIN SMOKED LAMP
by Achmad Choiruman in Craft > Costumes & Cosplay
1829 Views, 2 Favorites, 0 Comments
MAKING a CARDBOARD ALADDIN SMOKED LAMP


The spirit of making a story more interesting by making its complementary tools is very important because with the tools that are able to describe the real story is a skill how a story becomes more alive so I made this aladdin lamp to liven up the atmosphere when reading the aladdin story itself.
TOOLS

We need some tools :
Ruler,glue gan,iron solder, scissor,lead wire, pliers,marker and ect
Ingredients

cardboad, cable terminal, niceline wire, glue gan, liquid vapor, cooton, hair dyer fan, adaptor 12 volt 1 ampere,adaptor 15 volt 3 ampere and cable wire ect.

Take a part of cardboard, cut
from its two sides to the limit as seen on the picture

Take other piece of cardboard for the base glue the
long one around the oval ,make it like in the picture as if ready as seen below

Glue it on other side as in the
picture


Take one piece of cardboard to make the
lid by cutting from the two edges to the boundary of two points in the middle

Make the cap for the ketle or lamp as seen in the picture

Make a hole for the lid handle holder

Take one piece of cardboard to make the
lid by cutting from the two edges to the boundary of two points in the middle

Make 2 small cones

Put the 2 parts of the cone together with glue like that

Take one piece for the funnel

Make the handle then glue it on the right
side

Be Aladdin's lamp