MAKING SUPER COOL PENCIL HOLDERS
by ivanclopez in Workshop > Laser Cutting
3945 Views, 7 Favorites, 0 Comments
MAKING SUPER COOL PENCIL HOLDERS
Materials & Tools
Clamps
Forstner Bits
Wood 2x4 works well
Sand paper
Chop saw
sanding disk
Love
Clamps
Forstner Bits
Wood 2x4 works well
Sand paper
Chop saw
sanding disk
Love
CUT UP WOOD
Cut your 2x4 into rectangles
4.5-6" any bigger might not look so good any smaller might be a square.
You can use a chop saw or a saw
Tech Shop has one.
4.5-6" any bigger might not look so good any smaller might be a square.
You can use a chop saw or a saw
Tech Shop has one.
Make Your Holes
Use a forstner bits to make the holes the bigger the better more space for pencils or pens
Drill as deep as you can. Deeper is better
You should clamp your work when drilling deep.
Drill as deep as you can. Deeper is better
You should clamp your work when drilling deep.
Sand the Rough Edges
You can use sand paper or a disk sander to refine the edges.
Special Step
If you like the pencil holder as is your done
If you want to give them some flair then lets take them to the laser were you can customize them
Tech Shop has Laser they can help.
If you want to give them some flair then lets take them to the laser were you can customize them
Tech Shop has Laser they can help.