MAKE a HUGE LED CYLINDER “ 8 X 4 X 16 “

Do you want to make a huge Led Cylinder ? You are right place...

Hello guys, In this tutorial, We'r going to show you how to make a DIY Led Cylinder at home.

There are many circuits in the internet made with a led. One of them is led cube. The lots of led cubes in our research is quite high. So we wanted it to be a little different. And let's make a cylinder, not a cube.

So, our led cylinder consists of 8 layers. Each floor has 4 circles. and there are 16 leds in each circle. Totaly 8*4*16 equal is 512 leds. We have designed a piece to properly assemble the leds using solidworks. And we have printed the part we have drawn on our 3d printer.

So if you decided to make a led cylinder, you have to some equipments and materials.

///////////////// EQUIPMENT & MATERIAL LIST //////////////////

Arduino Nano

Led * 552

330 Ohm * 32

1 Kohm * 8

74HC595 * 8

BD168 * 8

Sockets & Pins & Cables

3D Printed Parts

Now, I guess you have materials and equipments. First of all , we designed a pcb or circuit. You can find circuit o last steps. As you can see in pics also. We are assembliying them. We started with resistors and sockets.

So we have circuit for led cylinder. Now, let's built huge led cylinder. We designed a 3D printable part for building.

You can find it o last step too.

8 layers or floors , 4 circles and each circle has 16 leds. Totaly is 512 leds.

And Done. Now lets try. We added some codes. and you see pics with detaily.

And Have FUN...

All files is here....

... To Better World.