Lord of the Rings Hot Glue Nameplate
by MakyMaky in Craft > Costumes & Cosplay
234 Views, 1 Favorites, 0 Comments
Lord of the Rings Hot Glue Nameplate
![lotr hotglue name plate 4.jpg](/proxy/?url=https://content.instructables.com/FNC/RGHJ/KOD7RLVS/FNCRGHJKOD7RLVS.jpg&filename=lotr hotglue name plate 4.jpg)
![lotr hotglue name plate 5.jpg](/proxy/?url=https://content.instructables.com/F4Q/XUJG/KOD7RLVT/F4QXUJGKOD7RLVT.jpg&filename=lotr hotglue name plate 5.jpg)
Hi, this is a cool simple name plate or a door plaque in the Lord of the Rings style using hot glue.
Supplies
![lotr hotglue name plate.jpg](/proxy/?url=https://content.instructables.com/FC0/6YSJ/KOD7RLZU/FC06YSJKOD7RLZU.jpg&filename=lotr hotglue name plate.jpg)
first, gather these supplies
- quarter inch wood ( I used a piece 6 1/4 by 5 1/2.)
- hot glue gun
- lots and lots of replacement glue sticks
- first color spray paint
- second color spray paint
Hot Glue Inscription
![lotr hotglue name plate 2.jpg](/proxy/?url=https://content.instructables.com/F6J/JZH9/KOD7RMA1/F6JJZH9KOD7RMA1.jpg&filename=lotr hotglue name plate 2.jpg)
draw your pattern onto the wood but leave some space around the edges. I used this English to Elvish translator to make the inscription:
https://www.jenshansen.com/pages/online-english-to...
add some decorations around the edges. I made some cute little swirls around the edges. (sorry no pics.)
Painting Part 1
![lotr hotglue name plate 3.jpg](/proxy/?url=https://content.instructables.com/FIF/ATT9/KOD7RMRA/FIFATT9KOD7RMRA.jpg&filename=lotr hotglue name plate 3.jpg)
take one of your paint colors and thoroughly coat the board. I did two coats of paint and that seemed enough.
Painting Part Two
![lotr hotglue name plate 3.jpg](/proxy/?url=https://content.instructables.com/F4T/5TH4/KOD7RN9O/F4T5TH4KOD7RN9O.jpg&filename=lotr hotglue name plate 3.jpg)
take your other paint color and put one thin coat of paint on. just enough to cover the first coat. this will create a two toned plaque.
Sanding
take a sheet of high grit (I used 320) sandpaper and lightly sand the name plate to expose the under color.
I only used two tones of gray so the sanding didn't show up very much. It would be super cool if the under coat was gold and showed up more.
Done!
![lotr hotglue name plate 4.jpg](/proxy/?url=https://content.instructables.com/FS3/6O1Z/KOD7RR4R/FS36O1ZKOD7RR4R.jpg&filename=lotr hotglue name plate 4.jpg)
![lotr hotglue name plate 5.jpg](/proxy/?url=https://content.instructables.com/FWA/SEJI/KOD7RR4S/FWASEJIKOD7RR4S.jpg&filename=lotr hotglue name plate 5.jpg)
now you know how to do art with hot glue, and a awesome Elven name plate!