Loom Maker and Bracelet Tutorial !

In this tutorial I will show you how to make a loom maker as well as loom bracelets ! This is a simple and easy way to make these cute bracelet with out hurting your finger !

supplies you will need include : clothes pins , cardboard , ruler , card board cutters , glue gun , glue sticks , paint , brushes , paint palette , loom bands / colorful rubber bands , and colorful paper .

first things first ! with your cardboard and clothes pin you will align them measure length with your ruler mine was around 3 inches longs , after this with my card board cutter I cut desired size to match my pins .

for my pins to stick to the card board on both ends I had to make it thicker , for this I stacked 2 pieces of card board , width being half a mm . After this I stuck them together with the glue gun

after this I also glued my pins on the card board !

I wanted a smoother share so I decided to round out my edges !

My favorite step paint time ! I mixed up my colors for a pretty pink . I first put a piece of colorful paper on the cardboard for smoother application , I did 3 coat of paint making sure to cover fully !

Congrats you just completed your Loom ! Now for the fun part making bracelets !

to make the bracelet you're gonna first , pick out your color to use and decide if you wanna make it 1 , 2 or 3 bands thicks . Now you're gonna apply 3 rubber bands criss crossed on the loom as seen in the image .

You're so close all you have to do is with the rubber band at the bottom you're gonna fold it over to top as you can see in the image and repeat until desired length ! YAYYY YOURE DONEEE !!!! have fun and get creative