Lolly Pop Pot
What You Will Need
To make this lolly pop pot you will need
1) lolly pop sticks
2) plastic lid ( I used shaving foam lid )
3) pen
4) glue
6) sharp standby blade
1) lolly pop sticks
2) plastic lid ( I used shaving foam lid )
3) pen
4) glue
6) sharp standby blade
Step 1
First start by lining the bottom of a lolly pop stick, with the bottom of the lid of your Choice. You then need to make a Mark about 1cm up,from the top of the lid onto your lolly pop stick.
Step 3
Using your stanly blade, cut along the mark you made and throw the short side you cut off to one side. Use this stick as a template for the other sticks and repeat this process with all your sticks
Step 5
After you cut all your sticks, start to glue them all the way around your lid until you have completely covered your lid in the cut down sticks
Your Done !!
Their you go, a nice simple lolly pop stick pot to put stuff in