Shelf for Your Locker at Work, School or Home.
by bhpbop in Workshop > Shelves
4868 Views, 10 Favorites, 0 Comments
Shelf for Your Locker at Work, School or Home.
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/F8B/XVIH/ID2XCNNA/F8BXVIHID2XCNNA.jpg&filename=15, 11:24 PM.jpg)
My dear wife scored some used lockers for our home. The kids and I have lockers in our work/school as well. In all cases we enjoy the size, look and sturdiness but find the height inconvenient for some items. I have seen a few purchasable locker shelves but they seemed rather flimsy for the price. I found my solution to be simple, sleek, sturdy and cheap. I found my parts from a Home Depot and Dollar Tree but know you could do just as well online or at used stores.
You Will Need - Screws &Thread Posts
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/FER/GLR6/ID2XCNNB/FERGLR6ID2XCNNB.jpg&filename=15, 11:24 PM.jpg)
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/FPH/YWCX/ID2XCNN9/FPHYWCXID2XCNN9.jpg&filename=15, 11:24 PM.jpg)
Each shelf will need:
- 4 x Screws
- 4 x Thread posts
I purchased my hardware from Home Depot but they're rather generic and easy to come by. I used a 8-32 thread for the screws and post. The cheapest screws were longer than I wanted. In turn I just purchased enough thread posts to cover the screws. You could do just as well with nuts but found these had a better distance per buck. Googling around I found you can get a nut/bolt kit for around $8 with more than enough hardware.
You Will Need - Shelf
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/FCT/LOE3/ID2XE90D/FCTLOE3ID2XE90D.jpg&filename=15, 11:24 PM.jpg)
I found the locker shelf needed to be less than 12 inches wide and 11 inches deep. While your locker could very well be a different dimension I've seen a number of DIY sites and lockers that all have this measurement. While I scanned a few cheap solutions my local Dollar Tree sold white boards that seem to be the ideal fit because:
- The 11.8" x 10.6" size was at perfect fit.
- The material was thinner and stronger than plywood, particle board, etc.
- The whiteboards had round edges that alleviated me from cutting out the corners.
- Whiteboards were smooth and not visually harsh.
Slide Screws Into Locker Sides
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/F7I/VIGM/ID2XE90C/F7IVIGMID2XE90C.jpg&filename=15, 11:24 PM.jpg)
My lockers have 4 holes on each side that line up. Slid the screws into each one.
Attach Thread Post(s)
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/F2T/PKDS/ID2XE90B/F2TPKDSID2XE90B.jpg&filename=15, 11:24 PM.jpg)
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/FWF/H6FR/ID2XE90E/FWFH6FRID2XE90E.jpg&filename=15, 11:24 PM.jpg)
Most folks will just need four. Due to compensation issues I went with four extra.
Insert Shelf
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/FMK/GTBU/ID2XE90F/FMKGTBUID2XE90F.jpg&filename=15, 11:24 PM.jpg)
Sunny side up or down; it's your call. I was hoping for whiteboards with skulls and chainsaws. Available options were flowers and sunshine. My daughter was happy but my son and I flipped over to the industrial side for our lockers.
Rinse and Repeat
![15, 11:24 PM.jpg](/proxy/?url=https://content.instructables.com/FG2/XT2C/ID2XE90G/FG2XT2CID2XE90G.jpg&filename=15, 11:24 PM.jpg)
They were easy enough to install and I have far better use of space for about $2 per shelf. Wish I had done this sooner!