Little Kid Chair Made From Pallet Wood

For this instructable, I am making a chair for little kids out 2x4 pallet wood.

Get the materials you need. I used about 5 2x4 inch pallet wood

The instructions that I had use to build this chair came from a DIY builder name Ana White. Instructions are in the link below.

Link: http://www.ana-white.com/2010/11/plans/four-dollar-stackable-children%E2%80%99s-chairs

The list for the materials on the instructions wanted the size to be 1x3 and 1x2 inch pallet wood. Since I only could use 2x4 inch pallet wood, I had to used the table saw and the planer to make the wood 1x3 and 1x2 inches.

After running the wood through the planer, I use the miter saw to cut the pieces.

Cut list is in the link below.

Link: http://www.ana-white.com/2010/11/plans/four-dollar-stackable-children%E2%80%99s-chairs

After I finish cutting on the miter saw, I start putting the pieces together. I made pocket holes into the side supports and used 1 1/4 pocket hole screws to screw into the front aprons. I use the same screws to screw to front legs, back slats, and the seat slats.

The link to the videos is down below.

Link:

Link: https://www.youtube.com/watch?v=WecTFn2blPg

As soon as the paint dries, you now have a finished, small chair for little children.