Lithophane Lamp From IKEA SVALLET Work Lamp
by gubutek in Living > Decorating
2817 Views, 6 Favorites, 0 Comments
Lithophane Lamp From IKEA SVALLET Work Lamp
![LampSmall.png](/proxy/?url=https://content.instructables.com/F42/6X7V/JZ93NEOF/F426X7VJZ93NEOF.png&filename=LampSmall.png)
This is a lithophane lamp shade designed to be fit on IKEA SVALLET work lamp
https://www.ikea.com/ca/en/p/svallet-work-lamp-dar...
The model has all the hardware for the lithophane light with a decent price. All you need to do is printing a new lamp shade.
Supplies
Material list:
- 1x IKEA SVALLET work lamp
- 1x E12 light bulb
3D Printing list:
- 3 lithophane photos with the dimension of 80x120x2mm to fit on the frame. You can use the online tool on http://3dp.rocks/lithophane/ to make lithophane photo from your image
- 1x photoIKEA.stl which you can use to attach to the IKEA lamp base
- 1x FrameTopIKEA.stl
- 1x FrameBottom.stl
- 4x FramePole.stl
3D Print Your Lamp Shade
Remove the Lamp Cord From the Original Lamp Socket
![LampCord.png](/proxy/?url=https://content.instructables.com/FKV/73A2/JZ93NEO3/FKV73A2JZ93NEO3.png&filename=LampCord.png)
Assemble the Lamp Shade
![LampShadeSmall.png](/proxy/?url=https://content.instructables.com/FB0/UESS/JZ93NEO4/FB0UESSJZ93NEO4.png&filename=LampShadeSmall.png)
- Assemble the lamp shade with 3 lithophane photos and 1x photoIKEA
- Wire the cord through the hole on FrameTopIKEA and assemble the socket
- Add the light bulb and test it
Attach the New Lamp Shade on the Base
![LampBase.png](/proxy/?url=https://content.instructables.com/F2I/8AP9/JZ93NEO2/F2I8AP9JZ93NEO2.png&filename=LampBase.png)
Enjoy!