Light Shadow Box
![IMG_20190714_195134-01-01.jpeg](/proxy/?url=https://content.instructables.com/FSU/RFYT/JY2TC5IF/FSURFYTJY2TC5IF.jpg&filename=IMG_20190714_195134-01-01.jpeg)
Hi All,
Few years back I came across "Illuminated cut paper light box by Harry and Deepti". I have being thinking about it for some time and now finally made one for a friend
In this instructable, I will share how to make one at home, hope you like it
What Do We Need ?
![IMG_20190714_145346-01.jpeg](/proxy/?url=https://content.instructables.com/FDS/AEKK/JY2TC2P0/FDSAEKKJY2TC2P0.jpg&filename=IMG_20190714_145346-01.jpeg)
- A wooden box ( I got this as part of wooden toy, so recycling it )
- Cartridge paper ( 4 White and one Red)
- Paper knife
- Steel scale
- Pencil
- Cutting board
- LED strip
- 12 V adaptor or LED driver
- GlueStick
Prepare
![IMG_20190714_145822-01.jpeg](/proxy/?url=https://content.instructables.com/FGE/OAWU/JY2TC2VJ/FGEOAWUJY2TC2VJ.jpg&filename=IMG_20190714_145822-01.jpeg)
- Based on inner dimensions of the wooden box, cut cartridge paper to the dimension
- My box was 164 mm square, So I cut squares of 163 mm for easy slide later
- Draw border of 10 mm on each side, this is our margin, we will not cut beyond this
- Also this will be used to add spacers
Layer 1
![IMG_20190714_154822-01.jpeg](/proxy/?url=https://content.instructables.com/FI8/T18M/JY2TC323/FI8T18MJY2TC323.jpg&filename=IMG_20190714_154822-01.jpeg)
- This is the first layer start from behind
- I took one from internet, you may download as other logo as you like
- You could print it or trace it on the cartridge paper
- Then cut the logo out as shown
- To diffuse light, we can use regular printer paper or baking sheet and paste it behind the logo
Layer 2
![IMG_20190714_155818-01.jpeg](/proxy/?url=https://content.instructables.com/FIY/503Z/JY2TC3F6/FIY503ZJY2TC3F6.jpg&filename=IMG_20190714_155818-01.jpeg)
![IMG_20190714_161817-01.jpeg](/proxy/?url=https://content.instructables.com/FS8/PPK2/JY2TC3LQ/FS8PPK2JY2TC3LQ.jpg&filename=IMG_20190714_161817-01.jpeg)
- This is second layer from behind
- This is a free hand drawing of spider-man's web
- Cut out carefully as shown
Layer 3
![IMG_20190714_173856_1-01.jpeg](/proxy/?url=https://content.instructables.com/F6Z/QDM2/JY2TC3YZ/F6ZQDM2JY2TC3YZ.jpg&filename=IMG_20190714_173856_1-01.jpeg)
![IMG_20190714_220806-01.jpeg](/proxy/?url=https://content.instructables.com/FJA/V72U/JY2TC4JR/FJAV72UJY2TC4JR.jpg&filename=IMG_20190714_220806-01.jpeg)
![IMG_20190714_220856-01.jpeg](/proxy/?url=https://content.instructables.com/F34/HQ76/JY2TC3LZ/F34HQ76JY2TC3LZ.jpg&filename=IMG_20190714_220856-01.jpeg)
- This is 3rd layer from behind
- I have used a red paper for spider man
- Cut out the outline , eye and spider logo
- Diffuse light by covering eyes and logo with small pieces of baking sheet
Layer 4, 5 and 6
![IMG_20190714_220155-01.jpeg](/proxy/?url=https://content.instructables.com/FFZ/2Y8Y/JY2TC4CZ/FFZ2Y8YJY2TC4CZ.jpg&filename=IMG_20190714_220155-01.jpeg)
![IMG_20190714_173146-01.jpeg](/proxy/?url=https://content.instructables.com/F65/NYUT/JY2TC46A/F65NYUTJY2TC46A.jpg&filename=IMG_20190714_173146-01.jpeg)
- These are 4th, 5th and 6th layers from behind
- Instead of using new squares, I am using left overs from the previous squares
- Cut out 3 layers of city outline as shown
- Added slots for some light to pass through
Layering
![IMG_20190714_175523-01.jpeg](/proxy/?url=https://content.instructables.com/FAK/9ZTE/JY2TC4QH/FAK9ZTEJY2TC4QH.jpg&filename=IMG_20190714_175523-01.jpeg)
![IMG_20190714_190320-01.jpeg](/proxy/?url=https://content.instructables.com/FZT/EA4O/JY2TC4XW/FZTEA4OJY2TC4XW.jpg&filename=IMG_20190714_190320-01.jpeg)
- I am using strips cut from corrugated box as spacers
- Stick these strips as frames behind each layer starting from front to the back
- `Use gluestick that dries faster
LED
![IMG_20190714_192340-01.jpeg](/proxy/?url=https://content.instructables.com/F6U/A181/JY2TC54Q/F6UA181JY2TC54Q.jpg&filename=IMG_20190714_192340-01.jpeg)
![IMG_20190714_193525-01.jpeg](/proxy/?url=https://content.instructables.com/F04/1BFS/JY2TC5W6/F041BFSJY2TC5W6.jpg&filename=IMG_20190714_193525-01.jpeg)
- Add LED Strip on the inside of the wooden box
- Connect the LED strip to a led driver
- Test that the LED strip works, mine had a issue with 1 element which did not work...
Final Assembly
![IMG_20190714_214503-01.jpeg](/proxy/?url=https://content.instructables.com/FQC/4NDO/JY2TC5BK/FQC4NDOJY2TC5BK.jpg&filename=IMG_20190714_214503-01.jpeg)
![IMG_20190714_195134-01.jpeg](/proxy/?url=https://content.instructables.com/FMI/J9OW/JY2TC5PA/FMIJ9OWJY2TC5PA.jpg&filename=IMG_20190714_195134-01.jpeg)
- One all glue is dried, carefully, push the paper layers into the wooden box
- You can cover the wooden box with some frame and glass
- But I intent to modify and adjust few layer in future...
- Find a corner and Light it up!! admire
I hope you liked this instructable and share suggest and feedback