Letter Wall Decor With LED Lights
by Pink Robin in Workshop > Pallets
7435 Views, 240 Favorites, 0 Comments
Letter Wall Decor With LED Lights
![led.jpg](/proxy/?url=https://content.instructables.com/FGJ/00ER/IAWCNP05/FGJ00ERIAWCNP05.jpg&filename=led.jpg)
If you want something special for your wall just find a pallet get LED lights and create magic! :)
See the instructions video here!
Enjoy:)
List of the Stuff You´ll Need
![11639333_10204536857725704_1787698339_o.jpg](/proxy/?url=https://content.instructables.com/FZW/2OFP/IAWCNOQG/FZW2OFPIAWCNOQG.jpg&filename=11639333_10204536857725704_1787698339_o.jpg)
![11428236_10204536861805806_409458145_o.jpg](/proxy/?url=https://content.instructables.com/F8L/KNJZ/IAWCNGC2/F8LKNJZIAWCNGC2.jpg&filename=11428236_10204536861805806_409458145_o.jpg)
TIP: Get the battery charged LED lights - it´s safer and will look better!
Use piece of double-sided tape to stick the battery holder on the inside of the pallet.
Staining the Pallet for Letter Color
![11159366_10204536867965960_1322162935_o.jpg](/proxy/?url=https://content.instructables.com/F6J/T5FN/IAWCNG9F/F6JT5FNIAWCNG9F.jpg&filename=11159366_10204536867965960_1322162935_o.jpg)
![11429435_10204536874286118_661073011_o.jpg](/proxy/?url=https://content.instructables.com/F5F/IUNX/IAWCNGE9/F5FIUNXIAWCNGE9.jpg&filename=11429435_10204536874286118_661073011_o.jpg)
Applying Sticky Vinyl Letters (with a Help of Transfer Foil)
![11542594_10204536877446197_488699177_o.jpg](/proxy/?url=https://content.instructables.com/FQA/BZ5X/IAWCNOOW/FQABZ5XIAWCNOOW.jpg&filename=11542594_10204536877446197_488699177_o.jpg)
![11428129_10204536887526449_2139973306_o.jpg](/proxy/?url=https://content.instructables.com/F3L/CSZG/IAWCNGAJ/F3LCSZGIAWCNGAJ.jpg&filename=11428129_10204536887526449_2139973306_o.jpg)
TIP: You can get these letters online for cheap and transfer foil is usually included.
Use plastic scraper (second photo left upper corner) to attach the letters to the transfer foil (and later to the pallet).
Painting Over the Letters & Removing Them (so Much Fun!)
![11540931_10204536893726604_1286518528_o.jpg](/proxy/?url=https://content.instructables.com/FQA/DIRU/IAWCNGEB/FQADIRUIAWCNGEB.jpg&filename=11540931_10204536893726604_1286518528_o.jpg)
![11281556_10204536894006611_1945421153_o.jpg](/proxy/?url=https://content.instructables.com/FJ8/HNV8/IAWCNG9H/FJ8HNV8IAWCNG9H.jpg&filename=11281556_10204536894006611_1945421153_o.jpg)
TIP: Use craft knife to remove the letters.
Drilling the Holes for LED Light Bulbs
![11543047_10204536895486648_1418796686_o.jpg](/proxy/?url=https://content.instructables.com/F2I/2NT4/IAWCNOPP/F2I2NT4IAWCNOPP.jpg&filename=11543047_10204536895486648_1418796686_o.jpg)
TIP: Count the bulbs first then drill :)
Installing the LED Lights
![11347815_10204536898646727_1013804846_o.jpg](/proxy/?url=https://content.instructables.com/FCL/DT7R/IAWCNG9O/FCLDT7RIAWCNG9O.jpg&filename=11347815_10204536898646727_1013804846_o.jpg)
![11347635_10204536902406821_1893344658_o.jpg](/proxy/?url=https://content.instructables.com/FVS/KM93/IAWCNG9J/FVSKM93IAWCNG9J.jpg&filename=11347635_10204536902406821_1893344658_o.jpg)
TIP: Be very carefull with the stapling because you can damage the wire! Use tape if you´re not confident with staple gun.
Enjoying the Result!
![KH1_0129.jpg](/proxy/?url=https://content.instructables.com/F9Y/VYOZ/IAWCNBSA/F9YVYOZIAWCNBSA.jpg&filename=KH1_0129.jpg)
![KH1_0138.jpg](/proxy/?url=https://content.instructables.com/FNB/NN1V/IAWCNBSZ/FNBNN1VIAWCNBSZ.jpg&filename=KH1_0138.jpg)
![11425713_10204536854885633_1038464026_o.jpg](/proxy/?url=https://content.instructables.com/F76/FRUR/IAWCNG9Q/F76FRURIAWCNG9Q.jpg&filename=11425713_10204536854885633_1038464026_o.jpg)
Looks nice switched off and even better switched on!:)