Letter E in PVC

by rgreen2014 in Circuits > Gadgets

682 Views, 0 Favorites, 0 Comments

Letter E in PVC

Photo on 1-23-14 at 8.35 AM #2.jpg
Fun project that takes little time. 

Gather Materials

Photo on 1-23-14 at 8.32 AM.jpg
You will need:
4 PVC pipes 3inches long at 1/2 inch thick
1 PVC pipe 1inch long at 1/2 inch thick
2 90degree connectors
1 T-Shape connector
PVC cutter
Ruler
Marker

Cutting

Photo on 1-23-14 at 8.54 AM.jpg
Cut the PVC pole so that you have 4 pipes at 3 inches and 1 pipe at 2 inches

Assemble

Photo on 1-23-14 at 8.35 AM.jpg
Put all of the 3 inch pipes in the open ends of the 90 degree connectors. 

Connect two of the 3 inch pipes with the T-Shape connector leaving the middle part of the T-Shape facing the middle. It should look like an incomplete square with and open piece in the middle. 

In the open end of the T-Shape connector put the two inch pipe