Lego USB
Materials
1. Hot Glue gun
2. Lego man (you can use 2 but for this I'm using one)
3. USB of any GB
2. Lego man (you can use 2 but for this I'm using one)
3. USB of any GB
USB
Take apart the USB drive until u get down to the base of it! Be careful!
Flip Over
Flip to this side
LEGO
Find a lego mini-figure of your choice!!:)
Hot Glue
Hot glue the man to the USB. If the USB has a light on it, I suggest that you glue the lego to
the opposite side.
Glue him so his feet face the device you're plugging the USB into. Make sure his legs can still move in case there is spacing problems!
If you have a clear lego brick (I do not) glue that to the side with a light on it! It will look sweet!
the opposite side.
Glue him so his feet face the device you're plugging the USB into. Make sure his legs can still move in case there is spacing problems!
If you have a clear lego brick (I do not) glue that to the side with a light on it! It will look sweet!
FINISHED
This is your finished product! It's really cheap and fun! You can make these for a fun gift for friends and family! ENJOY!