Lego Tri-Former Laserblast (30 Pc.)

This is a transformer that I accidentally made when messing with parts, and upgraded to this. I hope you enjoy.
(Also if you can come up with a better name, please comment)

(Dark Gray)
4 2x1 plates with handles
2 2x1 plates with clips
1 1x1 plate with clip on top
2 1x1 round 1x1 plate with handle on top
1 1x1 square flat plate

(Silver)
2 bended robot arms
2 Wolverine claws

(Black)
2 1x1 wedges
1 1x1 square plate with stud on top
1 1x1 brick with studs on the four sides
2 bended robot arms
2 1x1 plates with handle
1 handle with bar attachment (or whatever it’s called.)
1 2x2 round plate with one stud in the middle

(Translucent Light Blue)
2 1x1 round plates with stud (hole or no hole it doesn’t matter)

(Translucent Orange)
1 1x1 cone brick

(Translucent Red)
1 1x1 square plate with no stud
2 1x1 round plates, but one with a stud, and one without.

What you will need:
Your brick with four studs, 1x1 black plate, all 4 of your 1x2 plates, your 2x2 round plate, 1x1 red plate, 1x1 plate with clip, and a blue round plate.

So now we have a evil robotic trash can.

What you need:
1x1 cone
1x1 red round plates

What you will need:
2 1x1 plates with handle on top
2 silver robot arms
2 claws

What you will need:
2 black robot arms
2 1x1 plates with handle on side
2 black 1x1 wedges

What you need:
The rest of the pieces.
And sorry, but you don’t need that last blue stud.

Can sit a minifigure! Well, kinda…