Lego Torch Case
![WIN_20211208_17_37_17_Pro.jpg](/proxy/?url=https://content.instructables.com/FK6/880H/KWXJNBQ7/FK6880HKWXJNBQ7.jpg&filename=WIN_20211208_17_37_17_Pro.jpg)
things your going to need are: lego, torch and a base and now on to the building!
Measure
![WIN_20211208_18_19_36_Pro.jpg](/proxy/?url=https://content.instructables.com/F16/KHZ3/KWXJNCFF/F16KHZ3KWXJNCFF.jpg&filename=WIN_20211208_18_19_36_Pro.jpg)
measure how big the walls need to be e.g mine is 16 x 8 and 9 blocks high
Building
![WIN_20211208_18_47_58_Pro.jpg](/proxy/?url=https://content.instructables.com/FK1/6MCA/KWXJNDN7/FK16MCAKWXJNDN7.jpg&filename=WIN_20211208_18_47_58_Pro.jpg)
Next you have to to do the building the best way to build is putting 1 2x4 block half way on on top of another one then for the end you can put a 2x2 block next to the top/bottom block like in the image shown above.
The Front
![WIN_20211208_19_04_17_Pro.jpg](/proxy/?url=https://content.instructables.com/F9M/T9S3/KWXJNEO6/F9MT9S3KWXJNEO6.jpg&filename=WIN_20211208_19_04_17_Pro.jpg)
the front is going to need a gap in the middle so you can see the light and turn it on the walls can be just normal but don't forget that gap!
Sides and Back
![WIN_20211208_19_09_39_Pro.jpg](/proxy/?url=https://content.instructables.com/FZH/IE1Q/KWXJNEVK/FZHIE1QKWXJNEVK.jpg&filename=WIN_20211208_19_09_39_Pro.jpg)
sides, they are like the walls but with less pieces but here you should make sure you make a little window to see if anything is going on on the inside and the back is the same as the front but with no holes in it just a plain wall.
Roof
![WIN_20211208_19_16_23_Pro.jpg](/proxy/?url=https://content.instructables.com/FOC/N91X/KWXJNF3N/FOCN91XKWXJNF3N.jpg&filename=WIN_20211208_19_16_23_Pro.jpg)
the roof is just a normal roof but it needs a hole in the middle to poke your fingers in and fix anything on the inside and if your torch has a hook (like mine) you need a hole for it to hang on to things!