''Harry Potter" Lego Snitch With Resurrection Stone

I really hope you enjoy making this. All the steps will be in the next few pictures.

You need some red,black and yellow pieces and two white wings also.

Now put a 6x6 square around the first one. Make sure to leave a 2x2 hole in the middle

Now put an 8x8 square on top of the 6x6 and leave a 4x4 hole in the middle.

You should do this over and over again until you get to 12x12 and it has an 8x8 hole in the middle.

Now build another layer on top of the 12x12 it should look like the picture above from the side view.

now go to 10x10 inwards so there is a 6x6 hole in the middle.

You must now find some single pieces and put them on the inner perimeter of the square.

First make a 6x6 square then turn it over and get some red pieces to hold it together better, but keep the 6x6 shape the put a 4x4 square on top.
Do not put the lid on just yet.

Get a 2x2 square. Then put a 4x4 square on top. Now put another 2x2 square on the top. Now put your resurrection stone inside the golden snitch. Put the lid firmly on the snitch. Don't press down to hard or it will fall in.

It should look like so.

Get the two wing pieces and copy the pattern above until you have two identical wings. I just decided I would add in the pink , to give it a bit of colour.

Now put both of the wings on either side of the snitch. Hope you enjoy and love your Golden snitch from Harry Potter.