Lego Man USB X Cable Protector

The problem with the original design is that it is a tiny item and can be lost very easily inside your home because of its size. I am making this design because I want to fix that problem and improve the design of the flash drive overall making it more likely to be spotted if you lose it somewhere in your room or other places. This also functions as a cable protector to prevent wear and tear.

1x Lego Minifigure 1 ½ inches tall (4 cm) the width is 0.6 inches (1.6 cm).

1x USB 1.17" x 0.56" x 0.2"

1x Cable protector

For my first step, I decided to make the top half of my design since it would be the most difficult part to create out of the whole design. The height of its torso is 1 and 1/2 inches and the width would be 2 inches making it have a valid amount of space for the USB to go inside of the torso.

For my next step, I made the USB half of my design. The USB part is half an inch and the legs are an inch tall and the width is 3/4 of an inch. I made the legs have a hole so the USB could fit and it could become a Lego man as well.

For my final step, I decided to make the USB Legoman have a cable protector. The cable protector will be about 1 inch and a half. The reason why I decided to include a cable protector because over time cables will start to tear up and since the USB would most likely be near cables I thought it would be a good idea to include a cable protector.