Lego Hand

by fshuldiner21 in Living > Toys & Games

862 Views, 2 Favorites, 0 Comments

Lego Hand

DSCF8329.JPG
Plate Special 1 x 2 with Angled Handles on Side.jpg
Other lego piece thats cooool.jpg
plate-special-1-x-2-with-clip-horizontal-on-end.jpg
fguIASkfgvgsxcv lego.jpg
legolegolego.jpg
leeeegggggooo.png
LEGO MAFANGLFDGNSDFH.jpg
Lego peice that's coooool.jpg
Plate Special 1 x 2 with Clips Horizontal [Open O Clips].jpg
Plate Special 1 x 2 with Handle on End [Closed Ends].jpg

During this period of sheltering in place I broke into my Lego again. As I was sifting through them I had an idea: what if I made a Lego hand? The idea came to me out of the blue but I thought that it was worth a shot. I went through multiple prototypes but none of them worked very well. I continued to make new variations when I realized how cool it would be to have a Lego attachment on my hand as a used Lego so I could attach pieces to it so as to avoid losing them. I built it as a left hand that would attach to the back of your left hand allowing you to have a steady not-in-the-way Lego plate on the back of your hand. You could attach Lego claws, a Lego gun, a Lego shield, or just stick random Lego on it.

Supplies

  • Ten (10) 2 by 6s
  • Ten (10) 2 by 4s
  • Five (5) 2 by 2s
  • Five (5) 1 x 2 with horizontal clip on end
  • Five (5) 1 x 2 with handle on end
  • Five (5) 1 by 2s
  • Five (5) 2 x 1 with horizontal clips
  • Five (5) 2 x 1 side handle with closed ends
  • Two (2) 2 x 1 with angled handles on the side
  • Two (2) 4 by 4s
  • Three to five (3-5) Technic Rubber Belt 33mm

If any of these pieces are unfamiliar to you check out Rebrickable

Building the Fingers.

DSCF8292.JPG
DSCF8297.JPG
DSCF8311.JPG
DSCF8312.JPG
DSCF8299.JPG
DSCF8300.JPG
DSCF8301.JPG
DSCF8313.JPG
DSCF8302.JPG
DSCF8314.JPG

First collect the pieces:

Each finger has

  • 2 2 by 6s

  • 2 2 by 4s

  • 1 2 by 2s

  • 1 1 by 2s

  • 1 1 x 2 with horizontal clip on end

  • 1 2 x 1 with horizontal clip

  • 1 2 x 1 side handle with closed ends

  • 1 Technic Rubber Belt 33mm

Note, the color of the piece does not matter!

Then follow the pictures.

Building the Palm

DSCF8306.JPG
DSCF8307.JPG
DSCF8308.JPG
DSCF8309.JPG
DSCF8310.JPG

Collect the pieces:

  • 1 2 x 1 with angled handles on the side
  • 1 4 by 4
  • 1 1 x 2 with handle on end

Again, color does not matter.

follow the pictures to build the palm

Building the Hand.

DSCF8318.JPG
DSCF8319.JPG
DSCF8321.JPG
DSCF8315.JPG
DSCF8322.JPG
DSCF8317.JPG
DSCF8329.JPG

To complete the hand, attach the fingers to the clips on the palm, then loop the rubber bands around the desired fingers and there you go. My design used five fingers but yours does not need to. You can mod this Instructable by using only three or four fingers but any fewer than three does not give you enough traction to attach it properly to your actual hand. When you're done you will have a little platform that fits over your hand but still allows you to work.