Led Light Lamp

Hello guys, in this Instructable, we are gonna learn how to make a led light lamp. (Includes 3D printing)

Get a big piece of wood and measure how big you want your lamp.

We did it 11.5cm Width, 11.5 Length and 8 pieces.

Then, sand the pieces so they are soft and smooth and there are not pointy edges.

Afterwards, do an X on the pieces and mark a circle in the middle so you can punch a circle to put inside the led lights in 6 pieces not 7 because one has to be full so it's the top of the lamp.

After that, paint the sides of the pieces with the holes with stain and the one without the hole, the sides and the top. Let it dry fully for 30 minutes.

Meanwhile the stain is drying, use the program www.tinkercad.com to design 6 pieces with the same measures of the wood pieces. After finishing design them, 3D print them with transparent PLA.

Buy led lights so you can put them inside the lamp.

Arrange all the 3D pieces and wood pieces together and measure how long the led lights are gonna be.

After measuring the length of how the led lights are gonna be, start gluing the pieces together with silicone or school glue, preferably silicone.

After gluing the pieces, use a clamp to press on the lamp so it's perfectly together. Let it dry for 2 or 3 hours.

And this are the steps to make a led light lamp!