Leather Phone Neck Pouch

by hahnsatelier in Craft > Leather

3904 Views, 22 Favorites, 0 Comments

Leather Phone Neck Pouch

00_0005_Layer 2 copy 6.jpg
youtube.00_00_14_12.Still005.jpg
youtube.00_00_08_15.Still004.jpg
youtube.00_00_18_12.Still006.jpg
youtube.00_00_20_01.Still007.jpg
youtube.00_00_25_16.Still008.jpg

Hi, guys! I've made a simple pouch this time. The pattern was made for iPhone 7, so you need to change the pattern if you're making one for a cell phone of different size. Hope this instruction will help to make your own phone pouch!

Supplies

  • Leather : Buttero (col.bordeaux) 4oz
  • Hole punch : 20mm / 2.5mm / 1mm diameter
  • Rivet (6mm in diameter) X8
  • Sandpaper 400 grit
  • Edge beveler size #1
  • Awl
  • Wood slicker
  • Tokonole (Burnishing Gum)
  • Mallet
  • Ruler
  • Punching plate
  • Snap button setter (Small metal plate)
  • Snap button 10mm

Additional Video

[ASMR] Making a leather iPhone neck pouch | Leather working sound

There is a video as well and please check if you want to watch. Thank you!

Design and Sketch

youtube.00_00_52_09.Still011.jpg
youtube.00_00_52_21.Still012.jpg
youtube.00_00_54_03.Still013.jpg
youtube.00_00_58_02.Still014.jpg

Measure your phone and draw the shape roughly.

Download the Pattern

Please download and print out the pattern that I uploaded here. The pattern is 2 pages in total. (The PDF included a A4 and US letter size) IMPORTANT : Please set your printer 100% actual size option. Then, cut out the pattern with some margin.

Prepare the Pattern

youtube.00_01_05_16.Still015.jpg
youtube.00_01_21_26.Still016.jpg
youtube.00_01_25_00.Still017.jpg
youtube.00_01_36_27.Still018.jpg
youtube.00_02_23_26.Still019.jpg
youtube.00_02_28_07.Still020.jpg
youtube.00_02_37_01.Still021.jpg

I made the pattern through the doodle, It's made for iPhone 7 size so if you need other size, please redraw the pattern or just print out bigger or smaller.

Leather

youtube.00_02_39_13.Still022.jpg
youtube.00_02_48_04.Still023.jpg
youtube.00_02_53_23.Still024.jpg
youtube.00_03_06_24.Still025.jpg

Before cutting the leather, mark a dot on center of the circle with an awl first.

Cut the Leather

youtube.00_03_17_16.Still026.jpg
youtube.00_03_24_06.Still027.jpg
youtube.00_03_35_02.Still028.jpg
youtube.00_04_19_08.Still029.jpg
youtube.00_04_23_14.Still030.jpg

After marking, cut the leather according to the pattern. You can see the marked dots in the picture.

Smooth the Edges

youtube.00_04_24_15.Still031.jpg
youtube.00_04_27_07.Still032.jpg
youtube.00_04_34_16.Still033.jpg

With sandpaper (I recommend 400grit or 600grit), smooth the edges.

Bevel the Edges

youtube.00_05_02_19.Still036.jpg
youtube.00_04_53_17.Still035.jpg
youtube.00_04_46_08.Still034.jpg

Bevel every edge with a beveler. I used size #1.

Burnish the Edges

youtube.00_05_13_09.Still037.jpg
youtube.00_05_16_06.Still038.jpg

Apply finishing gum(Tokonole) and burnish the edges with a wood slicker.

Punch Holes

youtube.00_05_21_02.Still039.jpg
youtube.00_05_36_04.Still040.jpg
youtube.00_05_44_15.Still041.jpg
youtube.00_05_55_24.Still042.jpg

According to the dots, punch them with 2.5mm hole punch. But for the card section we need to use 1mm hole punch. You can use 2.5mm punch here as well, but it's gonna look too big.

Cut the Card Slot

youtube.00_06_01_28.Still043.jpg
youtube.00_06_04_19.Still044.jpg
youtube.00_06_06_16.Still045.jpg

Make a slit connecting the holes.

Set the Snap Button

youtube.00_06_16_11.Still047.jpg
youtube.00_06_26_18.Still048.jpg
youtube.00_06_29_04.Still049.jpg
youtube.00_06_40_25.Still050.jpg
youtube.00_06_42_28.Still051.jpg

I used a 10mm snap button. Set them with the setter.

Set the Rivets

youtube.00_06_45_22.Still052.jpg
youtube.00_07_02_20.Still053.jpg
youtube.00_07_04_16.Still054.jpg
youtube.00_07_06_00.Still055.jpg
youtube.00_07_27_07.Still057.jpg
youtube.00_07_17_16.Still056.jpg
youtube.00_07_40_22.Still058.jpg

We need 8 sets of rivet. I used the one 6mm in diameter and 7mm in height.

Put Leather String

youtube.00_08_02_05.Still059.jpg
youtube.00_08_04_26.Still060.jpg
youtube.00_08_12_23.Still061.jpg
youtube.00_08_16_24.Still062.jpg

For the neck strap, I used 3mm diameter the leather cord. It's roughly 55cm long, but you can adjust the length to your liking. Tie them, and we're all done!

Done!

youtube.00_08_44_06.Still063.jpg
youtube.00_08_58_13.Still064.jpg
youtube.00_00_33_02.Still010.jpg
00_0004_Layer 2.jpg

Thank you for watching my short instruction, I hope you get your own nice and simple phone pouch. See you next time then, Bye guys!