Leather Bracelet

Here is how to make a super easy leather bracelet.

You can make it in less than a half an hour!

Leather strips (1/8" width) & leather cord

It's better to have similar color chords.

Cut the leather strips to about 7 inches long. I made seven strips.

The strips shouldn't all be exactly the same length. It's better if they vary by about a quarter inch (i.e. some 7 1/4" and some 6 3/4". This will make for a more natural bundle.

Tie the strips with a cord.

Leave the chord about 4 inches at the end and make a knot as shown in the drawing.

Use the same cord to tie for the other end so you will create neat knots without cutting the cord. (see the drawing)

Trim the end of the strips of the outer the knots (shorter is better).

I cut the ends of the cord about 3 inches from the knots. I recommend you to check how it fits on your wrist before cutting it too short.

All done!!