Leather Billfold
You can have this acrylic pattern here:
http://www.leathercraftpattern.com/Acrylic-template/acrylic-short-wallet-pattern-A-108
The finished size is: 4.3" x 3.7" x 0.8" (11cm x 9.5cm x 2cm).
Advice:
Leather: 2.0mm (5oz) leather for surface, size 25cm x 10cm.
1.0mm(2.5oz) leather for lining, size 27cm x 30cm.
Hardware: 5cm x 8cm plastic foil.
Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-leathercraft-tools/leather-tool-kit/leathercraft-tools-leather-craft-patterns-leather-art-leather-carving-tool
Cut All Leather Pieces From Acrylic Pattern, and Punch Stitching Holes Use Chisel.
Glue the Plastic Foil on Flesh Side of Photo Slot.
Use Sand Stick to Rough the Edges, Then When You Paint Glue, It Will Glue Firmly.
Sew First Card Slot on Card Slot Back Leather, Only Sew the Bottom Stitching Line.
Glue Photo Slot On, Here You Can Iron a Logo As Your Need. Only Glue the Edges.
Glue the Finished Part on Lining, Only Glue Sides.
Do the Same for Right Part.
Sew Left Part Top Stitching Line.
Sew Right Part Top Stitching Line.
Sew Left Part Vertical Stitching Line.
When You Arrive Here, Stop Sewing.
Glue Surface Leather With Lining Leather.
And Go on Sewing, But Sew Surface and Lining Together, Then You Will Get a "L" Shape Stitching Line on Surface.
Now We Do the Same Steps for Right Part.
Nothing Is Better Than a Handmade Wallet.
