Leaf Motif Garden Stepping Stone

This is an easy way to make customizable stepping stones for the garden. They start out dark, but get more contrasty as they weather and age.

2 plastic containers, a variety of leaves, concrete mix, water, dish soap, mixing spoon, paint

Find a container the right size to cast your stone in.

Pour some dry concrete mix into the container. It should be 1.25” deep so it’s not too brittle.

Rinse and soap up the bottom and sides of the casting container.

The leaves should be upside down. Big leaves like hostas work well.

Mix the concrete with water. Alternate adding small amounts of water and stirring so it doesn’t get too runny. Add. Stir. Add. Stir…etc.

When the mix is ready carefully place a few cups over the leaves so they don’t move around. Once the leaves are covered, you can dump in the rest of the mix. 

Tap the container with a hammer all around the outside to bring the bubbles to the surface. Let It Set Overnight.

Carefully remove the container from your casting. Put a hand on the set concrete and flip the container over supporting it from the inside. Press the bottom of the container to make the casting pop out.

Remove leaves and let it dry. A fan helps if you are in a hurry.

Paint it and rub off with a sponge to make the design more visible. The paint collects in the rough and deep areas. The smooth shallow areas will appear lighter.

Place in the garden.