Lawn Mower Ramp
This project is for people with lawnmowers and need a way to drive it up and down easier. It cost about $350 and it took a couple weeks.
Materials:
Weld the Frame
Connect the metal pieces together, weld them and then brush the metal dust off.
Sand the Metal Then Use Rust-Oleum
Use the circular saw to sand down the metal, then use rust-oleum spray paint to stop it from rusting.
Make Support Frame
Get a new set of metal pieces and measure them to fit the box frame. Line them up with the back of the lawn mower, then with a sharpie make it.
Cut to Fit
With the saw, cut the ends of the metal pieces to fit in between the box frame.
Weld Together
With the welder, use it to weld the support frame with the box frame.
Enjoy
