Lasercut Plywood Pulley Cran
by nick_nr_1 in Workshop > Laser Cutting
3345 Views, 11 Favorites, 0 Comments
Lasercut Plywood Pulley Cran
To build this awesome crane, capable of lifting around 10 pounds, all you need is...
1 pcs of plywood 600 x 600mm, (6mm thick)
2 Syrings (12ml)
1 rubber tube
8 Bolts and Nuts
1 string (1m or longer)
Access to a laser cutter.
Piece a and Piece B
Take 7 x B and place theme through the holes on piece 1 x A.
Use Pieces 1 X C / 1 X D / 3 XE
Use Piece 1 X B / 1 X F / 1 X G / 1 X H / 3 X E
Use 1 X I
Now is time to put on the rope.
Bind the rope to the shown B piece.
Let the rope go around piece H and finally around piece F.
Use 1 X C / 1 X D / 3 X E
How Piece G Should Sit After Step 5
Use 1 X A
Use 8 X J
Use 1 X K
Push the crane down and into the holes on the piece K and hereafter press the crane forward.
Use Piece 2 X L
Install the Syring
Final
