Customized Foot Print

by dalegribble in Workshop > Laser Cutting

2754 Views, 56 Favorites, 0 Comments

Customized Foot Print

croc.JPG
sand.JPG

This instructable is an easy little customization if you have a lazer or dremel tool.

It is also a tribute to an awesome instructable by PaigeRussell.

https://www.instructables.com/id/Follow-Me-Flip-Flo...

Give it a look and see what you think

The tools and parts are pretty simple

Crocs

Laser

I use a 40 watt laser I got off of ebay. It is not the most user friendly thing but it is ok for engraving.

The File

Screenshot (7).png
Screenshot (8).png

This is the bitmap file that I used for my cut



Downloads

peaceloveinstructables.lyz

In the Cutter

15, 11:32 PM.jpg
15, 11:32 PM.jpg
15, 11:32 PM.jpg
15, 11:32 PM.jpg
15, 11:35 PM.jpg
15, 11:35 PM.jpg
15, 11:35 PM.jpg
I set the laser heat on about 11. This setting is a homemade dial. It more or less is about 55%. The speed is on 300 mm/sec. It engraves about an 1/8" deep.