Laser Cut or CNC Milled Corner Lamp

A simple DIY corner lamp to get familiar with Laser cutting or CNC milling methods and while at it manufacture a corner lamp for your room.

Hope you guys have fun making this as I did.

Using the provided layout above cut the acrylic sheet in its form using a Laser cutter (Thicker or thinner sheet will have fixing issues)

ALTERNATIVE

CNC milling can also be used to cut a plywood of the same size. (Thicker or thinner sheet will have fixing issues)

Put the cut pieces into the 2 discs and form a lamp as shown. Preferably use Chloroform for bonding.

If the cut pieces are formed from Plywood then wood epoxy should be used.

A standard lamp fixture or bulb holder from your local hardware store would suffice for housing the bulb.

Use your choice of colored nylon rope and wrapped it on the edges that are already cut in the design.

Voila a beautiful made corner lamp.